Osprey RF coaxial attenuators include continuously variable attenuators, DC bias attenuators, fixed attenuators, and step attenuators and programmable attenuators models. These RF attenuators are available in 50 Ohm impedance. Our series of coaxial attenuators are available in 2.4mm, 2.92mm, 7/16 DIN, 7mm, BNC, F, N, SMA and TNC connectors. RF dB attenuation values for these Osprey attenuators range from 0 dB to 120 dB. The frequency range of our RF attenuators is from DC to 12 GHz. This product line includes low to high power attenuators which have power handling that ranges from 0.5 Watts to 300 Watts. All our products are Rohs compliant.
Osprey carries a wide range of fixed attenuators with a broad selection of attenuation levels, frequency ranges, and power dissipation ranges. RF microwave attenuators(also known as RF pads) lower the amplitude of a signal(attenuate)a known amount and can be used in a wide variety of applications. These attenuator pads are used when a signal needs to be reduced to protect measurement equipment or other circuitry, to extend the range of power meters and amplifiers, and to impedance match circuits by reducing the VSWR seen by adjacent components. RF attenuators can prevent signal overload in amplifiers, receivers, and detectors, adjusting the signal level to a range that is optimal.
|Name||90 dB Push Button Step Attenuator||0-90 dB Push Button Step Coaxial Attenuator|
|Frequency (GHz)||DC-1.0 DC-2.5 DC-3.0||DC-2.5|
|Insertion loss ( dB)||≤1.2 ≤2.5 ≤3.0||≤3.0|
|Standing-wave Ratio (VSWR)||≤1.3 ≤1.4 ≤1.5||≤1.4|
|Attenuator accuracy||±0.5@0~10dB ±0.8@0~10dB ±1.0@0~10DB||±0.5@0~10dB|
|±0.8@10~50dB ±1.2@10~50dB ±1.5@10~50DB||±0.8@10~50dB|
|±2.0%@≥50dB ±3.0%@≥50dB ±3.5%@≥50DB||±2.5%@≥50dB|
|Attenuator Figure||1/2/4/8/15/30/30 shall work together with each||1/2/4/8/16/20/20/20dB|
|Power ( W)||2/5 W||10W|
|Connector Type||SMA-K or other N、BNC、TNC、F,etc||SMA or N or other if need|
|Dimensions(mm)||111 x20x31||145 x20x35|