Pneumatic Shielded Enclosures
Pneumatic Shielded Enclosures

(L)400x(W)165x(H)210mm
AS-401621 Pneumatic Drawer Shielding box
The dual rackmount test system in a stand-alone package with drawer type Pneumatic RF shield box is able to test more fixture at the same time and to enhance the production efficiency. Aluminum sheet material reduced lower frequency H field shielding. The dual rack mount configuration allows multiple installations for dense pack environment testing. Access to the DUT is easy by the pull-out slide giving you full access to the hinged top mounted shielded doors. Our Pneumatic RF shield box supports wide testing range to be applied various RF test solution such as GSM, WCDMA, WiMAX, LTE, GNSS, Bluetooth, Wi-Fi, etc.

(L)370x(W)370x(H)225mm
AS373722 Pneumatic RF Shield Enclosure
This AS373722 offers high isolation of 70dB from the frequency range of 0.8GHz-6GHz.This shield box is ideal for mobile or utility device measurement by maintaining stable and effective shielding performance in all frequency bands, like WIFI products or smart meter products, including heat meter, water meter, gas meter, and electricity meter. It can be used for benchtop or mobile shield boxes at anywhere because of its small size.

(L)280x(W)170x(H) 135 mm
AS281713 Pneumatic RF Shield Box
AS281713 offers lightweight and robust construction, versatile for any wireless testing need. All metal is conversion coated to maintain conductivity prior to powder coating to minimize oxidation. Inside RF absorber provides absorption at microwave frequencies, thus eliminating unwanted reflection within the RF enclosure.

(L)245x(W)220x(H)80mm
AS242208 Drawer Type Pneumatic RF Shield Box
The WLAN Pneumatic RF shield box has all the features of the AS242208 RF Shield Box but with the signal interfaces specifically designed for the high volume manufacturing or repair of WLAN and Wi-Fi RF devices. This WLAN RF Shield Enclosure can be used as an off-the-shelf RF test solution or customized to your I/O and device handling to suit most any testing need and offering greater than 70dB of RF isolation for frequencies of 0.8-2.4GHz and 60dB of RF isolation for frequencies of 2.4-6GHz.

(L)190x(W)257x(H)80mm
AS192508 Drawer Type Automatic RF Test Enclosures
This pneumatic tabletop signal testing chamber has multiple preconfigured I/O panel options. As these panels are conveniently interchangeable in the field, users can update their existing testing boxes to meet new testing requirements. Ethernet (POE) and USB 2.0 filter offerings are designed to maintain signal integrity and minimize electromagnetic interference from entering in or leaking out from the enclosure.

(L)200x(W)390x(H)120mm
AS203912 Pneumatic RF Shield Box
Shielded Tabletop Test Enclosures are high performance, portable shielded enclosures designed for fast, convenient EMI/RFI testing and repair.It shall be used for cell-site to cell-site testing, burst electronics applications, and RF resistor testing, two-way radio testing, and susceptibility testing.

(L)275x(W)215x(H)175mm
AS272117 Pneumatic RF Shield Box
Pneumatic RF Test Enclosures are self-contained, portable test cell enclosures designed for testing wireless devices in development, production, and/or quality assurance environment, from 800 MHz to 6 GHz.Other applications can include 802.11 A, B, G and N devices, Bluetooth, Zigbee, RFID, 3G, IOT, and LTE. These small device test enclosures can help isolate devices under test from outside signal interference allowing users to make reliable and repeatable measurements in a noise free environment.

(L)320x (W)270x(H)200mm
AS322720-Pneumatic RF Shielding Box
This panel can be configured with your own custom connector and interface options without affecting the integrity of the enclosure itself. It also allows your enclosure to be "custom configured" from a standard stock enclosure.The heavy duty RF sealed cover hinges open and close with a precision air piston.

(L)390x(W)290x(H)165mm
AS392916 Pneumatic EMI Shield Enclosure
Pneumatic Shield Box provides an efficient RF isolated test environment for the manufacturing of mobile phones and similar devices. In addition, Power connection, RF conducted testing and pogo pin testing are also automated because the shielding box has the necessary components for a fixture automation solution. The pneumatic RF shielding box not only have buttons to open and close the door or lid but also can be controlled by RS-232 for full automation.

(L)245x(W)118x(H)82mm*2
ASD241208 Dual rack mount Drawer Type Pneumatic RF Shield Box
This pneumatic RF shield box is designed for production by controlling the door or lid automatically using air pressure. It is ideal rf signal testing tool for automated production lines with the robot arm. Isolating test environments from unwanted signals. It is an RF enclosure with a dual door design that offers the best efficiency.DC power option is available using DB9 (5A max) or with terminal style (20A max) filtered connectors

(L)500x(W)500x(H)260mm
AS505026 Pneumatic RF Shield Enclosure
Test capability is compatible with all stages of device manufacturing and service. Efficiently and quickly test new devices using our interchangeable test cartridges. Repeat measurements with 100% confidence. For high volume manufacturing, this rf test box can be automated with pneumatics, complete with a 2-handed control system for full compliance with workplace occupational Health & Safety regulations.

(L)435x(W)415x(H)320mm
AS434132 Pneumatic RF Shield Enclosure
This rf test box eliminates any leakage along the perimeter of the RF enclosure. This makes test box conducive to testing all wireless technologies including 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. Each shielded enclosure is machined from a single piece of aluminum to ensure fit and function. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single of test box.

(L)420x(W)445x(H)280mm
AS424428 Pneumatic RF Shield Enclosure
Power Package is utilized to provide filtered power within the Shielded Box without degrading RF Shielding Effectiveness. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single rf test box.

(L)420x(W)425x(H)280mm
AS424228 Pneumatic RF Shield Box
This rf test box eliminates any leakage along the perimeter of the RF enclosure. This makes test box condusive to testing all wireless technologies including 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single rf testing box.

(L)400(x (W)400 x(H)400 mm
AS404040 Pneumatic RF Shielding Enclosure
This rf test box eliminates any leakage along the perimeter of the RF enclosure. This makes test box condusive to testing all wireless technologies including: 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. Each shielded enclosure is machined from a single piece of aluminum to ensure fit and function. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single rf test box.

(L)500x(W)540x(H)405mm
AS505440 Pneumatic RF Shielding Enclosure
This rf test box eliminates any leakage along the perimeter of the RF enclosure. This makes test box condusive to testing all wireless technologies including: 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single rf test box.

(L)355x(W)400x(H)230mm
ASD354023 Pneumatic RF Shielding Enclosure
Double-decker clamshell type Pneumatic RF shield box is able to provide wide frequency Range of 0.8-6GHz and Isolation of a>70dB an efficient RF test environment for the manufacturing or high volume repair for mobile phones and PCB assemblies where high throughput and reliable RF shielding is required. Motherboard onto lower cell and DUT onto the upper cell for WIFI signal throughput testing. Previous RF test process carried out in a sealed shielding chamber. The Shielding chamber requires a large space and the price is higher, is not conducive to mass production of the production units, so the shielding box is a good replacement

(L)400x(W)400x(H)400mm
AS404040B Pneumatic RF Shielding Enclosure
This rf test box eliminates any leakage along the perimeter of the RF enclosure. This makes test box conducive to testing all wireless technologies including 5G/LTE, Wi-Fi, Bluetooth, ZigBee, WiMAX, etc. The clam shell design provides ample space for easy access to the DUT. The spacious interior makes it possible to test multiple DUTs inside one single rf test box.

(L)295x(W)245x(H)100mm
AS292410D Drawer Type Pneumatic Shielding Enclosures
The test system in a stand-alone package with drawer type Pneumatic RF shield box is able to test more fixture at the same time and to enhance the production efficiency. AThe dual rack mount configuration allows multiple installations for dense pack environment testing. Access to the DUT is easy by the pull-out slide giving you full access to the hinged top mounted shielded doors. Our Pneumatic RF shield box supports wide testing range to be applied various RF test solution such as GSM, WCDMA, WiMAX, LTE, GNSS, Bluetooth, Wi-Fi, etc

(L)240x(W)185x(H)95mm Single Box
AS241809D Dual rack mount Drawer Type Pneumatic RF Shield Box
The dual rackmount test system in a stand-alone package with drawer type Pneumatic RF shield box is able to test more fixture at the same time and to enhance the production efficiency. Aluminum sheet material reduced lower frequency H field shielding. The dual rack mount configuration allows multiple installations for dense pack environment testing. Access to the DUT is easy by the pull-out slide giving you full access to the hinged top mounted shielded doors. Our Pneumatic RF shield box supports wide testing range to be applied various RF test solution such as GSM, WCDMA, WiMAX, LTE, GNSS, Bluetooth, Wi-Fi, etc

(L)430x(W)445x(H)305mm
AS434430 Pneumatic RF Shielding Enclosure
Find Shielded Test Enclosures for RF and Microwave applications from osprey who provides a customized solution. Using our standard sized I/O plate, there is plenty of room to allow a wide variety of connectors to be utilized. These plates are easily changed and allow one to use the same enclosure for a multitude of different I/O configurations.